Specialized water spectrophotometer

S60 Aqualine Series Specialized water spectrophotometer One of the laboratory equipments in water and wastewater are advanced spectrophotometers that can be used in water, sewage, irrigation water, fertilizer and soil decomposition.

Vis and UV-Vis models are recommended depending on the range of use and needs. If only the analysis of anions, cations and compounds in water is done, Vis Aqualine will generally suffice.

The UVbasic software provided with the Aqualine series comes with a ready-made kit program from 4 different kit manufacturers (Merck, Chemetrics, Macherey-Nagel and Matriks). Depending on the need, it can be supplied with 10, 20, 50 and 16 mm multi-mount holders as standard, as well as 10 x 4 mm manual switch replacement.

Apart from these, Aqualine software is also available to facilitate the use of calibration curves made in reputable laboratories. Details of the analysis can be followed through this software.

type of Specialized water spectrophotometer

1. Prove 100 Visible Water & Wastewater Analysis Spectrophotometer
2. Prove 300 UV-Visible Water & Wastewater Analysis Spectrophotometer

Technicial Specifications Specialized water spectrophotometer

	S60 Aqualine Single Beam Spectrophotometer (UVVIS)	S60 Aqualine Single Beam Spectrophotometer (VIS)
Wavelength Range	200-1000nm	325-1000nm
Wavelength Accuracy	± 1nm
Wavelength Repeatability	0,5nm	0,5nm
Photometric Sensitivity	±0,5%T	±0,5%T
Photometric Reproducibility	0,3%T	0,3%T
Photometric Display Range	.-0,3 ile 3,0 ABS, 0-200%T, 0-9999C .	.-0,3 ile 3,0 ABS, 0-200%T, 0-9999C .
stable	±0,002A/saat@500nm	±0.002A/hr@500nm
Stray Beam	≤0,3%T@220,360 nm	≤0,3%T@220,360 nm
Optical System	Single Beam(Monochromator 1200 lines/mm)	Single Beam(Monochromator 1200 lines/mm)
PC connection/Printer	USB and parallel port	USB and parallel port
Bathtub Housing	10,20,50 mm rectangular and 16 mm round	10,20,50 mm rectangular and 16 mm round
Optional tub seat	4*10mm square tub manual changer	4*10mm square tub manual changer
Software	UVBasic+Ready test kits program	UVBasic+Ready test kits program

Prove 600: The powerful UV/VIS Spectrophotometer for your Complex Analysis

The spectrophotometerst  Prove 600 is a powerful UV/VIS spectrophotometer designed for your process water analysis. With 100 mm cuvettes and high resolution optics, the Prove 600 is the perfect instrument for complex kinetic and spectral measurements. The Prove 600 is pre-programmed for the most sensitive silicate and chloride testing so you can detect the lowest analyte concentrations and protect your boiler & cooling water systems from damage.

Pre-programmed for precise measurements

Handpiece located island most sensitive chloride, silicate and sulfate testing  Prov 600 including over 180 spectrophotometers are preprogrammed for cell tests as well as methods and reagents. Test kits can be stored at room temperature. There is no need to wait for the test to reach room temperature and no change in results due to temperature

Longer Light Path, More Precise Measurements

Besides 10, 20 and 50 mm cells, the Prove 600 device is compatible with 100 mm cells for more precise measurements. The methods you can do with 100 mm cells are: silicate in process water, iron in drinking water and phosphate in surface or process water

Automatic Recognition with Live ID

Every spectrophotometers reagent test kit comes with AutoSelector with Live ID barcode. It transfers not only more data, but also “live” data, unlike other barcodes, thanks to automatic free calibration updates.

Simply insert the cuvette and AutoSelector into the spectrophotometer. Ambient light shielding means you don’t have to close the lid during analysis. Prove 600 transmits test method, lot number, expiry date and calibration updates via Live ID and calculates results accordingly. This gives you safe, fully traceable results in your process water analysis and ease of inspection.

Robust and Durable Design

The structure of the spectrophotometers Prove 600 instrument is resistant to many chemicals used in process water analysis. If liquid spills into the tub seat, simply remove the tub seat, rinse with water, and dry clean.

Customizable and Portable Data

Accurate documentation is essential in process water analysis. Prove 600 makes this safer and easier than ever before. The smart display provides a list of all results, easily filtered by date, time, spectra, methods, sample ID, keyword or user.

It provides data transfer in any desired format, from summary and short reports to comprehensive extensive reporting. The Prove 600 offers multiple ways for secure data transfer: You can connect your spectrophotometer to the printer using the USB port or save the data you want to the external memory.

Analytical Confidence with AQA Prime

AQA Prime makes analytical quality assurance for your process water analysis both easy and extremely safe. The instrument provides you with a brief overview of the AQA status, detailed information, updates and settings. You can select individual settings and measurements for each AQA control. It also provides complete verification and documentation for each step of quality control: AQA 1 (instrument check), AQA 2 (system check), and pipette check

measuring technology	Spectrophotometer with reference beam technology
wavelength range	190 – 1,100 nm
Lamp type	xenon flash lamp
Measurement modes	Concentration, absorbance, transmission, multiple wavelengths, Spectra scans and kinetics in absorbance or transmission modes
Spectral bandwidth	1.8nm
Wavelength resolution	1 nm (scan 0.1 nm)
Toluene/hexane ratio	> 1.4 – correlation of spectral bandwidth to resolution for the toluene standard in hexane solution measured at 25°C ambient temperature
Wavelength repeatability	±0.1nm
Wavelength accuracy	± 1 nm
stray light	≤ 0.1 % transmission (340 nm); ≤ 1 % transmission (198 nm)
photometric range	±3.3 Abs
absorbance resolution	0.001 Abs
Absorbance repeatability	± 0.003 absorbance @ 1 absorbance (between 200 nm and 900 nm)
Absorbance accuracy	@ 230 – 900 nm 1 absorbance: ±0.004 absorbance 2 absorbance: ±0.004 absorbance 2.5 absorbance: ±0.006 absorbance
Scanning	Free choice in wavelength range Gain: 0.1/1/5 nm Recording time for the entire wavelength range: < 7 min
Smart Screen Display	p-cap glass touch screen
Live ID barcode	Automatic 2-D barcode recognition for all spectrophotometers cell and reagent tests Contains barcode, lot, expiry date and calibration information. Information is stored for each measurement.
Tub size	16 mm round cell, 10, 20, 50 and 100 mm rectangular cuvettes (auto cuvette recognition)
tub holder	Detachable for easy cleaning
Methods	Pre-programmed methods for all spectrophotometers cell and reagent tests, additional user-defined methods: 99 concentration modes, 20 kinetic modes, 20 wavelength scans
Apps	Free pre-programmed applications: bromate, beer analysis package (MEBAK/EBC methods), sugar (ICUMSA), oil (DOBI, olive oil)
Protection from external light	Measurement with open lid thanks to proprietary solution (patent pending)
AQA prime	Separate setting for all methods AQA 1 mode: Checking the device with PhotoCheck and/or Certipur standards AQA 2 mode: system check with CombiCheck or CRM standard solutions
Monitoring functions	Device-assisted pipette control and sample matrix control
Custom measurements	Quick access to absorption/transmission, kinetic and spectrum measurements
Software and method update	Free update via Internet and USB stick via Merck Millipore website
Connection interfaces	USB: 2 x USB-A (printer, USB stick, keyboard or barcode reader), 1 x USB-B Ethernet: LAN connection
data storage	2,000 single measurement data (in concentration, absorbance / % transmission and multi-wavelength measurement modes). 20 measurement result records for each of the spectra scan and kinetic methods
Language options	English, German, Spanish, French, Italian, Portuguese, Chinese (simplified and traditional), Japanese, Russian, Bulgarian, Czech, Danish, Dutch, Greek, Hungarian, Indonesian, Malay, Macedonian, Norwegian, Polish, Romanian, Serbian, Slovenian , Swedish, Thai, Turkish, Vietnamese
Protection class	IP 31 for optics and electronics
Power source	3-wire power supply (1.2 m) with US, EU and UK ends Total cable length 3 m (1.8 and 1.2 m)
power requirements	100 V – 230 V, 50 – 60 Hz
Energy consumption	Standard operating condition: 15 W; energy saving mode: 8.4 W
Heat	Operation: 10 – 35°C; storage: -20°C to +60°C for 24 hours)
Appropriate relative humidity	Operation: 20 – 80% rH, ambient humidity conditions for storage 20 % to 95%. non-condensing
Dimensions	416 x 276 x 237mm (W x D x H)
Weight approx.	6.8kg
Warranty period	24 months
EMC	Directive 2004/108/EC, EN IEC61326-1, IEC61326-1
Device security	EN 61010-1, UL IEC61010-1