Description

EC Meter

These pH and  EC Meter (conductivity indicators) meet a need for continuous control, at a lower cost, with little maintenance.
pH indicator, HI981402: HI1286 plastic electrode (supplied), double junction, with PTFE diaphragm, 2 meters of cable and BNC plug.
Conductivity indicators: each instrument comes with a probe with 2 meters of cable and 1//2” thread for in-line mounting.
For conductivity meters, the probes have a built-in temperature sensor that automatically corrects the temperature.
In measurement mode, a visual alarm can be triggered.
Used in aquariums, agriculture, water treatment or industry.
Robust and waterproof IP67 housing, with fixing eyelet.
The 220/12V adapter power supply is the most suitable for continuous monitoring.
To be ordered with the calibration solutions.

Mini Controllers:

Laboratory equipment for internal installation of small indicator & controller
piping and similar uses

Traditionally, process monitoring has required significant investments in system design, equipment, maintenance and operation. Our

By introducing the miniature controller, we offer a solution for companies that need to monitor their processes economically.

has been

Hannah’s Gro’Chek and Pronto monitors are easy to use, accurate and continuous for TDS, pH, ORP and EC measurements.

Monitoring is possible. These rigid yet compact in-line equipment can continuously monitor even in harsh environmental conditions.

designed to perform. Hannah’s innovative Gro’Chek and Pronto instruments are specifically designed for the water quality management and hydroponics industry.

was developed for In this trend, these equipments not only improve the system, but also

It had to be extremely tight and accurate. Both the Gro’Chek and Pronto series are designed to withstand high temperatures and moisture.

It is made with a dust/water barrier case. They are also designed to provide an external 12VDC power supply.

This allows continuous monitoring without worrying about battery shortage or replacement. In addition

An alarm function that turns on the lamp when it exceeds the measurement range set by the user has been added, especially to prevent interference with resistance.

A pH electrode is designed to prevent this. The TDS and EC indicators are each capable of automatic temperature compensation. You can also install in-line

For this purpose, you can choose an electrode with an external cable. In a process where monitoring two items at the same time is required,

Use Combo . These instruments monitor pH and ORP, EC or TDS via two separate LED alarm signals.

It’s possible. In swimming pools and hydroponics, setpoints and relays can be adjusted, and pH, ORP,

Choose from EC and TDS small panel controllers.